Ecco 12.8V 100AH Lithium Battery 1.28kWh

Ecco 12.8V 100AH Lithium Battery 1.28kWh

Extended Cycle Life: Provides up to 20 times more cycles

and a float/calendar lifespan five times that of lead acid.

battery, which helps to keep replacement costs down and

cut the overall cost of ownership.

Weighs less: Around 40% of the weight of a similar lead acid battery. lead's "drop in" substitute

acid batteries.

Greater Power: Delivers twice the power of a lead acid battery,

maintaining high energy while having a high discharge rate

capacity.

Improved Safety: The Chemistry of Lithium Iron Phosphate

removes the possibility of fire or explosion caused by

A scenario involving excessive charging or a short circuit that has a significant impact.

It may be connected in parallel with up to four units or in series with up to four units.

SPECIFICATIONS

• 12. 8V is the nominal voltage.
• 100Ah is the rated capacity.
• 1280 Wh is the nominal energy.
• The Combined Approach: 4S
• Cycle Life: 5000 cycles at 50% DOD at 35°C
• Monthly Self Discharge: Monthly Self Discharge
• The charge efficiency is 97%.
• 10. 8 V is the typical discharge cutoff voltage.
• The recommended charging voltage is 14. 2 volts.
• Suggested Charging Current: 50 amps
• Suggested discharge current is 100/150 amps.
• 12 kg
• Dimensions: 330 x 172 x 220
• IP65

Please maintain the power level of the battery pack at around 50% when it is not in use for extended periods of time. When the battery pack is in demand, please keep its charge level at around 50%.

The power level should be maintained at about 50% and the battery should be recharged every three months, whether it is used for long-term storage or is not used at all.

Temperature between 20°C and 55°C and relative humidity between 5% and 85% are the environmental needs for storage. The battery pack should be kept in a dry place.

and keep it away from fire and heat sources, as well as avoid contact with corrosive chemicals in a well-ventilated environment.

Warranty for 3 years

Warranties:

An authorized Master electrician or skilled electrical wireman with a current Department of Labor registration must install all batteries and inverters. After installation, a legitimate electrical certificate of compliance (COC) that is specific to the installation of the backup or solar system must be given. The installation must adhere to ALL of the requirements of SANS 10142. Any warranty claim that does not include installation photographs, a legitimate COC, and evidence that a licensed wireman or master electrician installed the device may be denied, and the warranty claim will be rendered void.