10KW SUNSYNK Single Phase Low Voltage Hybrid Inverter + Wi-Fi Connectivity

10KW SUNSYNK Single Phase Low Voltage Hybrid Inverter + Wi-Fi Connectivity

Description:

The Sunsynk 10kW Hybrid Inverter is designed for flawless solar integration in residential, commercial, and industrial applications. It has triple MPPT channels, high current support, and intelligent BMS adaptability, making it suitable for both ongrid and offgrid applications. It provides dependable, highefficiency performance across a wide range of energy needs.

Battery Input Options

• Lithium-ion and lead-acid batteries are supported.
• Voltage range for operation: 40 to 60 volts
• 220A is the maximum current for charging and discharging.
• Integrated external temperature sensor
• Intelligent 3-stage charging with equalization
• Lithium-ion batteries' automated BMS communication

PV Input Requirements

• The maximum DC input power is 13,000 W.
• Rated PV input voltage: 370V (range 125V–500V)
• 150 V–425 V is the MPPT voltage range.
• Voltage range at full load: 200 V to 425 V
• Three MPPTs, each with two strings, make up the triple MPPT system.
• Current input from the solar panel: 26A + 26A + 26A
• Maximum short circuit current: 44A + 44A + 44A

Grid Integration and AC Output

• Rated power: 10,000W | Maximum: 11,000W
• Maximum off-grid power: Up to twice rated power for 10 seconds
• Output current: maximum 50A
• Voltage/frequency: 50/60 Hz | 220/230 Vac for L/N/PE
• Grid support for single phase, two-thirds phase, and split phase systems
• Quick bypass transfer with a maximum passthrough of 70 amps
• Adjustable from 0. 8 leading to 0. 8 lagging | Power factor: 1. 0
• Overall harmonic distortion (THDi): 3% or less
• DC injection: Less than 0. 5% In

Ratings for Efficiency

• 97. 6% is the inverter's efficiency.
• 97. 0% efficiency weighted for Europe
• 99. 9% is the effectiveness of MPPT tracking.

Protection & Compliance

• built-in safeguards:
• Anti-islanding
• PV (reverse polarity)
• Issue with the insulation resistor
• Overload of output and surge protection
• safeguard against short circuits
• monitoring residual current
• Certified to:
• IEC/EN 6100061/2/3/4, IEC/EN 621091/2
• UNE217002, G98/G99, CEI 021, EN505491, AS4777. 2, VDE4105

General Data

• Intelligent cooling system with quiet operation (less than 30 dB)
• RS485 and CAN are used to communicate with the BMS.
• Temperature range: 40–60°C (derating >45°C)
• Measurements: 420 mm W x 670 mm H x 233 mm D (not counting the supports)
• 32 kg
• IP65-rated protection makes it wall-mountable.

Guarantee

ten-year guarantee of repairs.

Important:

The installation must be completed by a Department of Labor-licensed Master Electrician or registered wireman. All work must adhere to SANS 10142, and a valid Certificate of Compliance (COC) must be provided that is unique to the installation. Applications made without the necessary paperwork (certified installer, installation photographs, COC) may be rejected.