3.5KVA / 3500W 24V ECCO Hybrid Inverter with 100A MPPT Plug & Play System + 2.71kWh Lithium Battery (Solar-Compatible)

3.5KVA / 3500W 24V ECCO Hybrid Inverter with 100A MPPT Plug & Play System + 2.71kWh Lithium Battery (Solar-Compatible)

The complete, portable backup inverter battery system.

Description:

Dependable Power Backup for Load Shedding

This integrated, portable inverter system guarantees a continuous power supply during power failures. It combines a 3. 5kVA pure sine wave inverter with a 24V lithium-compatible battery system to provide consistent power for vital equipment such as TVs, WiFi routers, lights, and chargers. It is intended for use in homes and small enterprises.

A plugandplay power system is a straightforward backup option that supplies power during load shedding or power outages; no complicated installation is necessary.

The Mechanics:

• Connect it to a wall outlet - The system charges its built-in battery when the power is on.
• Automatic Power Switching – The system switches to battery power immediately when the power goes out.
• Keep the Basics Operating - You may connect WiFi, TVs, lights, laptops, and chargers straight into the system.
• Recharge as soon as the power is restored — The system immediately recharges for the next blackout after the electricity returns.
• Solar Ready (Optional) – The device may be charged by solar panels even if there is no grid power.

Key characteristics include:

Effective Power Management

• A pure sine wave output guarantees a steady power supply for delicate electronic devices.
• integrated 100A MPPT charge controller for effective solar charging
• There are several output priority modes supported: UTL, SOL, and SBU.
• activation of lithium battery for increased battery life

Compatibility and Flexible Charging

• The range of the PV input voltage is 30Vdc to 160Vdc.
• Solar Integration Power: Up to 4000W
• Solar and AC charging: Maximum combined charging current of 100A
• battery management utilizing RS485 BMS communication

LITHIUM BATTERY FOR SVOLT 24V 2. 71KWH

• Energy: 2. 71 kWh
• Wall-mounted installation type
• Battery Chemistry: Lifepo4
• 25. 6V is the nominal voltage.
• Nominal Capacity: 106Ah
• Energy Density: 2713. 6 Wh
• Dimensions (LxWxH): 419 x 350 x 154 mm
• Weight (approx. ): 25. 4 kg
• Feedthrough terminal is the kind of terminal.
• Case Material: SPCC
• Built-in BMS: Yes
• Internal Resistance: less than 25 mΩ
• Trip Efficiency: Over 99%
• Self Discharge Per Month: 3% or less
• Maximum Parallel Connection: 4 Pieces
• Max. Series Connection: 2 pieces
• Cycle Life (90% DOD at 0. 3c, 25°C): Over 6,000 Cycles
• Discharge Temperature: between 20 and 65 degrees Celsius
• Temperature Range for Charging: (0 to 50)°C
• Storage Temperature: (10 to 30)°C
• Bluetooth (App): Not necessary
• LCD Display: Yes
• Heating Capability: Optional

An Intuitive Interface

• movable steel enclosure with two lockable wheels
• Removable dust cover for defense against harsh conditions
• surge plug (2. 5mm cabtyre, 1m power wire)
• For simple appliance connections, the female plug socket is double-sided.

Length of Time During Which Power Is Backed Up

• For 2225 hours, 150 watts of power are used to run the TV, Wi-Fi, and lights (at 100% DOD).
• grid electricity or solar panel recharge batteries (optional).

Set-up and Upkeep

• To extend the battery life, leave the device connected and switched on.
• Ideal for DIY solar users, homeowners, and small firms
• Weighs around 65 kg
• Unit Dimensions: 60 cm x 60 cm x 49 cm

Compliance and Warranties

• A licensed electrician must install it.
• A legitimate Certificate of Compliance (COC) is necessary.
• The installation must follow the guidelines of SANS 10142.