5KVA Dyness Single Phase Hybrid Inverter + 5.12kWh Dyness Lithium-Ion Battery (Model DL5.0 100AH 1C)

5KVA Dyness Single Phase Hybrid Inverter + 5.12kWh Dyness Lithium-Ion Battery (Model DL5.0 100AH 1C)

JUST AN INTERNET OFFER! Orders may be placed for in-store pickup.

Dyne5. 0L1PA is the model name for the Dyness 5KW Single Phase LV Hybrid Inverter, which has CT and WiFi.

The DYNE 5. 0/6. 0/8. 0L1PA series is made for domestic hybrid systems. The inverter can work with Dyness low-voltage lithium-ion battery DL5. 0X/DL5. 0C/ Powerbox Pro to optimize self-consumption and offer backup power in the event of a grid failure or insufficient PV power to meet load demand.

Product Features:

• Automatic generator on/off control and generator connection using various input methods
• Automatic UPS switching (under 4 ms)
• Provides peak shaving control in both "selfuse" and "generator" mode
• Maximum charge/discharge current of up to 135A (5. 0/6. 0K) and 190A (8. 0K)
• Six selectable charge/discharge time options
• 200% surge power backup overload capacity in 10 seconds
• Enables flexible 1ph and 3ph connections in parallel with a maximum of 36kW (5. 0/6. 0K) and 48kW(8. 0K).

Details:

• DC input (PV side):
• Suggested maximum PV output: 8 kW
• Maximum input voltage is 600 volts.
• Rated voltage: 300 V
• Start-up voltage range is 90 to 520 V.
• Maximum input current: 16 A / 16 A
• Maximum short circuit current: 24 A / 24 A

Battery:

• Battery: Li-ion
• Maximum charge/discharge capacity: 5 kW
• Maximum current for charge/discharge: 112 A
• AC output (Grid side):
• Rated output power: 5 kW
• 25 A is the maximum output current.
• Maximum input current: 34. 1 A

In general

• Measurements (WHD): 405560205 mm
• Weight: 24 kilograms
• IP66 ingress protection

Five-Year Warranty

All batteries and inverters must be installed by a skilled electrical wireman or master electrician who is properly registered with the Department of Labor. Following installation, an electrical certificate of compliance (COC) that is valid and specific to the installation of the solar or backup system must be given. The setup must adhere to every aspect of SANS 10142. A warranty claim may be denied and rendered invalid at the void if it is not accompanied by installation images, a valid COC, and evidence that a competent wireman or master electrician completed the installation.

Details about the Battery

• LiFePO4 is the battery's type.
• 5. 12 kWh is the nominal battery energy.
• 100 Ah is the nominal capacity.
• 51. 2 V is the nominal voltage.
• Voltage at which it operates: 44. 8 to 57. 6 volts
• Suggested C Rate for Charging and Discharging
• Maximum Discharge C Rate 1C
• Suggested Charge/Discharge Current
• Maximum Continuous Charging Current is 75A.
• Maximum Continuous Discharge Current: 100A
• Highest charge/discharge current at maximum power is 110A for 15 seconds.
• Discharge Depth (DOD) is 90%.
• 54 kg is the net weight.
• Size [WDH] 558545150 mm
• Temperature Range for Charging: 0 to 55°C
• Temperature Range for Discharge: 20–55°C
• Communication: RS232, RS485, or CAN
• Life Cycle[1] At least 6,000 Cycles
• Protection Level IP20
• Growth of as many as 50 units at a time
• Pros Compact design, suitable for hybrid and offgrid configurations
• UN38. 3/CEEMC/IEC62619/CEI021 are the certification and safety standards that are now being implemented.

[1] Testing conditions: @25°C, 95% DOD, 0. 2C charging/discharging

Ten-year warranty