11KVA VITO Pure Sine Wave Hybrid Inverter MPPT + 5.12kWh Ecco Lithium Battery + 6 x Tier 1 Mono Solar Panels

11KVA VITO Pure Sine Wave Hybrid Inverter MPPT + 5.12kWh Ecco Lithium Battery + 6 x Tier 1 Mono Solar Panels

Adaptable Power Management

• Integrates battery charger, MPPT solar charger, and inverter for continuous power.
• The output of energy is clean and stable because to the pure sine wave inverter.
• Because it doesn't need batteries, it can be set up in a variety of locations.
• The integrated MPPT solar controller maximizes charging efficiency.

simple setup

• LCD screen allows for a selectable input voltage range for household appliances and personal computers.
• The battery charging current may be adjusted to meet the needs of different uses.
• Using simple LCD settings, prioritize solar or AC charging.
• When AC power is restored, the device automatically restarts.
• The cold start feature enables the engine to start even without grid power.

Dependable Safety Mechanisms

• Overloads, overheating, and short circuits are all protected against, which increases reliability.
• The intelligent design of the battery charger optimizes battery performance and lifespan.
• Overcharge protection is set at 63Vdc to avoid harm.

Specifications for Solar Input

• Rated Power: 5500W x 2 for high-efficiency performance.
• The highest open circuit voltage for the PV array is 500 Vdc.
• Voltage range for MPPT: 60 to 500 Vdc, allowing for a wide range of solar array arrangements.
• Maximum MPPT Charge Current: 160A for best solar charging.
• Maximum Input Current: 18A x 2 for improved energy harvesting.

Mode for Charging Utilities

• Maximum Charging Current (AC+PV): 160A.
• 120A is the maximum AC charging current.
• The Design Is Compact and Strong
• The dimensions are 540 x 403 x 122 mm.
• Weight: 14. 8 kilograms.
• engineered to offer dependable performance and effective cooling in a variety of settings.

The bundle contains

• Vito 11kW Hybrid Inverter with MPPT x 1
• User Manual x 1
• Lithium battery (Ecco 51. 2V 100Ah 5. 12kWh W51100 – wall-mounted)

Important Features:

• Wall-mounted design – simple to install and visually appealing
• Lithium Iron Phosphate (LiFePO4) cells have a long lifespan and are safe.
• The maximum charge/discharge rate is 1C.
• An easy-to-use interface
• Works with a variety of inverter models.
• Accommodates a maximum of sixteen parallel groups
• Meets EU TUV and North American UL requirement

Benefits:

• Extended Cycle Life: Lead-acid batteries have a cycle life that is 20 times longer and a float/calendar life that is five times longer.
• Reduced Weight: About 40% less than comparable lead-acid batteries
• Higher Power: Maintains high energy capacity while delivering twice the power of lead-acid batteries.
• Broader Temperature Range: 20°C to 60°C
• Higher Safety: Reduces the possibility of fire or explosion caused by impact, overcharging, or short circuits

What's Inside the Box?

• Battery
• Battery Cables and Mounts

Battery Specifications:

• Battery Type: Set to "USE"
• Voltage for Bulk Charging: 56. 456. 6V
• Floating Charge Voltage: 54V
• Cutoff Voltage: 47 V

Technical data:

• Voltage Nominal: 51. 2 V
• 100Ah is the rated capacity.
• Total Power: 5. 12 kWh
• Ideal Operating Voltage Range: 43V to 54. 5V
• Short Circuit Protection: Yes
• Poweron Reverse Connection Protection: Optional
• Highest Charging Voltage: 57. 6 V
• Ideal Charging Voltage: 56. 4 V (Recommended)
• Highest Possible Continuous Output Power: 5500 W
• Maximum Instantaneous Output Power: 7500 W
• Local Parameter Setting: Supported
• Maximum Installation Dimensions (mm): 480 x 170 x 500
• Dimensions of the Package (mm): 590 x 290 x 615
• 49 kg in weight
• IP Rating: IP54
• Communication: RS485, RS232, CAN
• 15-year lifespan

Battery:

• Voltage: 48 volts
• Maximum Discharge Current: 220 A
• Voltage of the Floating Charge: 54VDC
• 63 VDC is the overcharge protection.
• Approach to Charging: CC/CV

Installation Needs and Warranties

• Battery with a 5-Year Warranty
• Inverter with a 2-year Repair Warranty
• 20-Year Solar Panel Warranty
• A licensed Master Electrician or skilled electrical wireman who is legally registered with the Department of Labor must carry out the installation.
• Following installation, a valid Electrical Certificate of Compliance (COC), which is unique to the solar or backup system, must be granted.
• Installation must adhere to SANS 10142 in its entirety.

Any warranty claim must include the following information:

• Photos of the setup
• A legitimate certificate of compliance
• Evidence of installation by a certified wireman or Master Electrician

The warranty may be nullified if the aforementioned is not provided.