Dyness 5KVA Hybrid Inverter (Single Phase)

Dyness 5KVA Hybrid Inverter (Single Phase)

EXCLUSIVE ONLINE TRANSACTION! MAY BE PURCHASED FOR IN-STORE PICKUP

Dyne5. 0L1PA is the model name of the Dyness 5kW single-phase LV hybrid inverter, which includes WIFI and CT.

The DYNE 5. 0/6. 0/8. 0L1PA series is made for home hybrid systems. The inverter can be used in conjunction with Dyness low-voltage lithium-ion batteries DL5. 0X/DL5. 0C/ Powerbox Pro to increase self-consumption and offer backup power in the event of a grid failure and an insufficient amount of PV power to meet load demand.

Product Features:

• Automatic generator On/Off control with several input options for connecting the generator
• automatic UPS switching (less than 4 ms)
• In both "selfuse" and "generator" mode, it provides peak shaving control.
• Maximum charge/discharge current up to 135A at 5. 0/6. 0K and 190A at 8. 0K
• 6 possible charge and discharge times
• The capacity to handle a 200% increase in surge power backup over 10 seconds
• In parallel, it can support flexible 1ph and 3ph connections with a maximum of 36 kW (5. 0/6. 0K) and 48 kW (8. 0K).

Specifications:

• DC input (PV side):
• 8 kW is the advised maximum PV power.
• Maximum input voltage: 600 V
• Rated voltage: 300 V
• Starting Voltage Range: 90–520 V
• Max. input current: 16 A / 16 A
• Maximum short circuit current: 24 A / 24 A

Battery:

• Liion battery type
• Maximum power for charge/discharge: 5 kW
• Maximum charge/discharge current: 112 amps

AC output (Grid side):

• rated output power: 5 kW
• Max. output current: 25 A
• Maximum input current is 34. 1 A.

In general

• Measurements (WHD): 405560205 mm
• Weight: 24 kg
• IP66 ingress protection

5-year warranty

Guarantees: A licensed electrical wireman or Master electrician with a valid registration with the Department of Labour must install all batteries and inverters. Following installation, an electrical certificate of compliance (COC) must be issued, pertaining particularly to the installation of the backup or solar system. The entire installation must adhere to SANS 10142. If a warranty claim lacks installation pictures, a legitimate COC, and evidence that a licensed wireman or master electrician performed the installation, it may be denied, and the warranty claim will be null and void.