Ecco 11KVA MPPT Hybrid Inverter (Pure Sine Wave, 11000W) with 2x 5.12kWh Lithium Batteries (Wall Mountable)

Ecco 11KVA MPPT Hybrid Inverter (Pure Sine Wave, 11000W) with 2x 5.12kWh Lithium Batteries (Wall Mountable)

The bundle comes with:

• 1x Ecco Hybrid Inverter, 11 KVA
• 2x 5. 12 kWh Ecco Lithium Battery

Details on the Inverter (HIN11000S)

• Model: 11KVA / 11000W Ecco MPPT Hybrid Inverter (Pure Sine Wave)

Essential Attributes:

• 2 MPPT built-in
• PV or Utility can be used to activate lithium batteries.
• RS485 connection for LiFePO4 battery compatibility
• Power factor: 1. 0
• Maximum PV Input: 500 Vdc
• MPPT 160A integrated
• It is capable of functioning without a battery.
• Dust cover that may be removed in extreme conditions
• WiFi remote monitoring is an option.
• Provides support for a variety of output priority modes: SUB, SBU, SUF
• The EQ function maximizes battery performance and increases battery life.

Technical Data:

• Capacity: 11 kW / 11 kVA
• Maximum PV Input Power: 11 kW
• No Parallel Capability
• Lithium Battery Activation: Yes (through PV or Utility)
• Lithium Battery Communication: Yes (RS485)

Input:

• 230 VAC is the nominal voltage.
• Allowable Voltage Range:
• 170280 VAC (for personal computers)
• 90280VAC (for household appliances)
• Frequency: 50/60 Hz (Auto Sensing)

Output:

• 220/230/240VAC is the rated voltage.
• Excessive power: 2200 VA
• Frequency: 50/60 Hz
• Waveform: A Perfect Sine Wave
• Transfer Time:
• for computers, 10 ms
• 20 milliseconds (for household appliances)
• Highest Efficiency: 94%
• Protection Against Overload: 5 seconds at 140% load

Battery:

• Voltage: 48 volts
• Maximum Discharge Current: 220A
• Voltage of the Floating Charge: 54 VDC
• Overcharge Protection: 63VDC
• Charging Technique: CC/CV

Charging with Solar and Air Conditioning:

• MPPT is the type of solar charger.
• Maximum PV Array Power: 5500W x 2
• Maximum Open Circuit Voltage of PV: 500 VDC
• MPPT Voltage Range: 60 VDC to 500 VDC
• Input Current from Solar Max: 18A x 2
• The highest possible current for charging solar panels is 160A.
• 120A is the maximum AC charging current.
• Maximum Charge Current: 160A

Communication & Physical:

• Dimensions (mm): 540 × 415 × 122
• 15 kg is the net weight.
• Dry contact, RS232, and RS485 are the communication interfaces.
• LCD display

Lithium Battery (Ecco 51. 2V 100Ah 5. 12kWh W51100 – Wall Mounted)

Major Attributes:

• Wall-mounted construction is simple to install and looks good.
• Lithium Iron Phosphate (LiFePO4) cells have a long lifespan and are safe.
• Maximum charge/discharge rate of 1C
• An easy-to-use interface
• Works with a variety of inverter manufacturers.
• Provides support for a maximum of 16 simultaneous groups
• conforms to EU TUV and North American UL norms

Benefits:

• Greater Cycle Life: Five times the float/calendar life and twenty times the cycle life of leadacid batteries.
• Lighter Weight: About 40% lighter than similar lead-acid batteries
• Higher Power: At twice the power of lead-acid batteries, it still has a high energy capacity.
• Temperature Range: 20°C to 60°C
• Enhanced Safety: Removes the possibility of explosion or fire caused by overcharging, short circuits, or impact.

What is inside the box?

• Battery
• Mounts and Battery Cables

Battery Specifications:

• Battery Type: Set to "USE"
• Voltage for bulk charging: 56. 456. 6V
• The floating charge voltage is 54 volts.
• The cutoff voltage is 47 volts.

Technical Details:

• 51. 2 V is the nominal voltage.
• Nominal Capacity: 100Ah
• Overall Power: 5. 12 kilowatt-hours
• Optimal Operating Voltage Range: 43V to 54. 5V
• Protection against short circuits: Yes
• Reverse Connection Protection during Power On: Not required
• Maximum Charging Voltage: 57. 6V
• Optimal Charging Voltage: 56. 4V (Recommended)
• 5500 W is the maximum continuous output power.
• Maximum Instantaneous Output Power: 7500W
• Supported Local Parameter Configuration
• Maximum Installation Dimensions (mm): 480 × 170 × 500
• 590 by 290 by 615 mm is the size of the package.
• Weight: 49 kg
• IP Rating: IP54
• Communication: RS232, RS485, CAN
• Life Expectancy: 15 years

Needs for Installation and Warranties

• Warranty of 5 years
• A certified Master Electrician or skilled electrical wireman with current registration with the Department of Labor must carry out the installation.
• Following installation, a legitimate Electrical Certificate of Compliance (COC), unique to the backup or solar system, must be provided.
• All components of the installation must adhere to SANS 10142.
• Warranty claims must include:
• Photographs of the installation process
• Authentic COC
• Evidence of installation by a licensed Master Electrician or qualified wireman
• The warranty may be null and void if the aforementioned is not supplied.