VITO 11KVA Pure Sine Wave Hybrid Inverter with MPPT Technology + 5.12kWh Ecco Lithium Battery

VITO 11KVA Pure Sine Wave Hybrid Inverter with MPPT Technology + 5.12kWh Ecco Lithium Battery

Management of flexible power

• The battery charger, MPPT solar charger, and inverter are integrated to provide a steady source of electricity.
• A pure sine wave inverter guarantees a steady and clean energy output.
• Does not require batteries, allowing for a variety of installations.
• The built-in MPPT solar controller maximizes charging efficiency.

Configuration That Is User-Friendly

• LCD allows for variable input voltage range for household appliances and personal computers.
• Charge current can be customized to fit different uses.
• Easily set the LCD to prioritize solar charging or AC.
• When the AC power is restored, the device automatically restarts.
• The cold start function enables starting even in the absence of grid power.

Dependable Safety Mechanisms

• Increased reliability thanks to protection against overloads, overheating, and short circuits.
• The intelligent battery charger design optimizes battery life and performance.
• To avoid damage, the overcharge protection is set at 63 Vdc.

Solar Input Requirements

• rated at 5500 W x 2 for optimal efficiency.
• Maximum PV Array Open Circuit Voltage: 500Vdc.
• Voltage Range for Maximum Power Point Tracking: 60Vdc to 500Vdc for versatile solar array designs.
• Maximum MPPT charge current: 160A for the best possible solar charging.
• Maximum Input Current: 18A x 2 for improved energy capture.

Mode for Charging Utilities

• Maximum Charging Current (AC+PV): 160A.
• 120A is the maximum AC charging current.

Small and Sturdy Design

• Measurements: 540 x 403 x 122 mm.
• Weight: 14. 8 kilograms.
• Engineered to provide dependable performance and effective cooling in a variety of conditions.

The bundle includes:

• One Vito 11kW Hybrid Inverter MPPT
• 1 x User Manual

Lithium Battery (Ecco 51. 2V 100Ah 5. 12kWh W51100 – Wall Mounted)

Key Features:

• Simple to install and visually appealing thanks to the wall-mounted design.
• Lithium Iron Phosphate (LiFePO4) cells have a long lifespan and are safe.
• Maximum charge/discharge rate of 1C
• Simple UI
• Works with a variety of inverter manufacturers
• Accommodates as many as 16 simultaneous groups
• Meets EU TUV standards as well as North American UL regulations

Benefits:

• Longer Cycle Life: Lead acid batteries have a 5x longer float/calendar life and a 20x longer cycle life.
• Lighter Weight: About 40% of the weight of similar lead-acid batteries
• Higher Power: 2x the power of lead acid batteries while retaining a high energy capacity
• Temperature Range: 20°C to 60°C
• Superior Safety: Eliminates the possibility of an explosion or fire caused by impact, excessive charge, or short circuits.

What is inside the box?

• The battery
• Battery Cables & Mounts

Battery Specifications:

• Select the "USE" option for the battery type.
• Voltage of Bulk Charge: 56. 4–56. 6 V
• Float Charge Voltage: 54 volts
• Voltage at Cutoff: 47 V

Technical details:

• Rated Voltage: 51. 2 V
• Nominal Capacity: 100 Ah
• 5. 12 kWh is the total power output.
• Ideal Voltage Range: 43V to 54. 5V
• Yes, there is short circuit protection.
• Reverse Connection Protection When Powering On: Optional
• Maximum charging voltage: 57. 6 V
• Optimal Charging Voltage: 56. 4V (Recommended)
• Maximum Continuous Output Power: 5500 W
• 7500 watts is the maximum instantaneous output power.
• Configuration of Local Parameters: Supported
• Maximum Installation Dimensions (mm): 480 x 170 x 500
• Package Dimensions (mm): 590 by 290 by 615
• Weight: 49 kg
• IP classification: IP54
• Communication: RS232, RS485, CAN
• Life Expectancy: 15 years

Battery:

• Voltage: 48 volts
• The maximum discharge current is 220 amps.
• Voltage of the Floating Charge: 54 VDC
• Overcharge Protection: 63 VDC
• Charging technique: CC/CV

Warranty & Installation Needs

• Battery with a Five-Year Warranty
• Inverter with a two-year repair guarantee
• A licensed electrical wireman or Master Electrician with a current registration with the Department of Labor is required to carry out the installation.
• After installation, a valid Electrical Certificate of Compliance (COC) must be provided, which is exclusive to the solar or backup system.
• All aspects of the installation must adhere to SANS 10142.
• A warranty claim must include the following:
• Photographs of the installation
• Authentic COC
• Evidence of installation by a licensed Master Electrician or skilled wireman
• Not meeting the aforementioned requirements might invalidate the warranty.