Hybrid Inverter 36000W MPPT 100A + 2.56kWh Lithium Battery Solution

Hybrid Inverter 36000W MPPT 100A + 2.56kWh Lithium Battery Solution

Description:

With this all-in-one solar-ready backup system, you can overcome load shedding. The Solar Step Combo combines a high-efficiency Must 3. 6kVA hybrid inverter with two 12. 8V ECCO 100Ah lithium batteries (total 2. 56kWh). With its dependable performance and sophisticated monitoring capabilities, this configuration is perfect for small houses, workplaces, or basic backup power requirements.

The combo includes:

• 1x Must PV1800 3. 6kVA 24V Hybrid Inverter (1-Year Warranty)
• Two 12. 8V 100Ah ECCO LiFePO4 Batteries (Total 2. 56 kWh - 3-Year Warranty)

Essential characteristics of an inverter:

• Clean sine wave output for consistent AC power
• lithium battery communication (CAN) is supported
• Integrated 100A MPPT solar charge controller
• Solar voltage up to 400V, PV input up to 4000W
• Functions with or without the use of batteries
• Dual AC outputs for intelligent load distribution
• CAN and RS485 ports for observation
• Protection from cold starts and excessive discharge

Ratings for Performance:

• Rated Output: 3600 W / 3600 VA
• Input from the battery: 24 V DC, 135 A
• AC Output: 230VAC ±5%, 50/60Hz
• AC Charging: 60A at 24V
• Maximum VOC: 400V | MPPT Range: 30–320VDC
• Solar Input: 100A | Maximum PV Power: 4000W

Battery specifications for the ECCO (each unit):

• 12. 8V is the nominal voltage.
• Rated Capacity: 100 Ah
• Storage Capacity: 1. 28 kWh (Total: 2. 56 kWh)
• Lithium Iron Phosphate Chemistry (LiFePO4)
• Lightweight and small for simple installation

Warranty and Installation:

PV1800 3. 6kVA 24V Hybrid Inverter (1-Year Warranty) is a must.

ECCO LiFePO₄ batteries with 12. 8V 100Ah capacity (2. 56 kWh in total – 3-year warranty)

Units must be installed by a licensed wireman or master electrician in order to activate the warranties. All installations must adhere to SANS 10142 standards, and a COC (Certificate of Compliance) that is specific to the installation must be issued. Warranty claims must be supported by evidence of a compliant installation, including images and other documentation.