Dyness 5KVA Single Phase Hybrid Inverter with 5.12kWh Lithium Ion Battery (DL5.0, 100AH 1C)

Dyness 5KVA Single Phase Hybrid Inverter with 5.12kWh Lithium Ion Battery (DL5.0, 100AH 1C)

JUST ONLINE TRANSACTIONS! MAY BE PURCHASED FOR PICKUP AT THE STORE.

Dyness 5KW Single Phase LV Hybrid Inverter with CT & WIFI Included – Dyne5. 0L1PA

The DYNE 5. 0/6. 0/8. 0L1PA series is intended for hybrid systems in homes. When there is not enough solar power to meet the load demand, the inverter can be used with Dyness low-voltage lithium-ion battery DL5. 0X/DL5. 0C/Powerbox Pro to optimize self-consumption and offer backup power if the grid fails.

Product Attributes:

• Automatic generator On/Off control and generator connection via several input channels
• switching between UPS systems automatically (under 4 milliseconds)
• Provides peak shaving management in both "selfuse" and "generator" modes
• The maximum charge/discharge current is up to 135A(5. 0/6. 0K) and 190A(8. 0K).
• six configurable charge and discharge time options
• Overload capability of a 10-second 200% increase in surge power backup
• Provides support for flexible 1ph and 3ph connections in parallel with a maximum capacity of 36kW (5. 0/6. 0K) and 48kW (8. 0K).

Specifications:

DC input (PV side):

• Suggested maximum PV power: 8 kW
• Input voltage at its maximum: 600 volts
• Rated voltage: 300 volts
• Voltage at startup: 90–520 V
• Maximum input current: 16 A / 16 A
• The maximum short-circuit current is 24 A/24 A.

Battery:

• Liion battery type
• The maximum charge/discharge power is 5 kW.
• Highest charge/discharge current: 112 A
• Grid-side AC output:
• Rated output power: 5 kW
• Maximum output current: 25 A
• Maximum input current: 34. 1 A
• Common
• 405560205mm (WHD)
• Weight: 24 kg
• IP66 ingress protection

5-year warranty

Warranties: Only a licensed electrician or Master electrician with a current registration with the Department of Labor may install batteries and inverters. After installation, a valid electrical certificate of compliance (COC), specific to the installation of the solar or backup system, must be issued. All components of the installation must adhere to SANS 10142. A warranty claim may be denied if it is submitted without proof that the device was installed by a licensed wireman or master electrician, installation pictures, and a legitimate COC, and it will be deemed invalid.

Specifications of the Battery

• LiFePO4 is the kind of battery.
• 5. 12 kWh is the rated battery energy.
• Capacity in Name: 100 Ah
• 51. 2 V is the nominal voltage.
• Working Voltage range: 44. 8 to 57. 6 volts
• Recommended Charge & Discharge C Rate 0. 5C
• Maximum Discharge C rate
• Suggested Charging/Discharging Current
• Maximum Continuous Charge Current 75A
• Maximum Continuous Discharge Current: 100 A
• Maximum power charge/discharge current 110A (15s)
• Discharge Depth (DOD) is 90%.
• 54 kg is the net weight.
• 558545150 mm is the size [WDH].
• Range of Temperatures for Charging: 0 to 55°C
• Temperature range for discharge: 20 to 55°C
• Communication: RS232/RS485/CAN
• Life Cycle[1] At least 6,000 cycles
• Degree of Protection lP20
• up to 50 units in parallel expansion
• Benefits The small design allows for usage in hybrid and off-grid systems.
• Safety Standard & Certification: The UN38. 3/CEEMC/IEC62619/CEI021 are all going through the process.

[1] Test circumstances: 95% DOD, @25°C, 0. 2C Charge/Discharge

10-year warranty