5.5KVA 48V ECCO Hybrid Inverter Plug & Play System with 4x 100AH Deep Cycle Batteries (Solar Ready)

5.5KVA 48V ECCO Hybrid Inverter Plug & Play System with 4x 100AH Deep Cycle Batteries (Solar Ready)

Description:

In the event of load shedding, the all-in-one, portable backup inverter battery system offers dependable power. With lockable wheels and robust handles, this little and portable device is perfect for usage at home, at the workplace, or in a small business. Maintain the smooth operation of vital equipment such TVs, computers, Wi-Fi, and lighting.

By being solarready compatible, this system enables you to increase your offgrid capabilities by installing solar panels, which lessens your reliance on the grid.

Important Characteristics:

Reliable Backup Power

• Immediate battery changeover during load shedding
• When grid power is restored, vehicle batteries recharge automatically.
• On a 150W load, it may power vital equipment (TV, WiFi, lights) for up to 1012 hours.
• Solar-ready: solar panel-compatible for off-grid energy storage

Hybrid Inverter (5. 5kVA / 5500W)

• 5500 W continuous power, pure sine wave output
• To maximize efficiency, the output power factor should be 1.
• integrated MPPT solar charge controller (100A) for increased energy conversion efficiency
• Supports a variety of output priority modes (UTL, SOL, SBU, SUB).
• Parallel operation with up to 12 devices (single-phase/three-phase compatibility)
• Wide range of PV input voltage (120 VDC to 500 VDC)
• Battery balancing mechanism for maximum battery life
• Parallel operation without wires (no additional current sharing cable needed).
• RS485 communication and WiFi monitoring for BMS

Battery Performance and Solar Charging

• Maximum PV Array Power: 5500 W
• The solar voltage range of the MPPT is 120VDC to 500VDC.
• Maximum MPPT Charging Current: 100A
• A mix of solar and AC charging, with a maximum charge current of 100 amps.

Recommendations for Battery Compatibility

• For best performance, it works well with solar panels and ECCO batteries.
• Battery life is increased by built-in battery equalization.
• Use in conjunction with AGM deep cycle batteries or highly efficient LiFePO4.

Technical Details:

Inverter Mode:

• Nominal Power: 5500 VA/5500 W
• DC Input: 48 VDC, 127 A
• AC Output: 230V, 50/60Hz, 23. 9A

AC Charger Mode:

• 230 V, 50/60 Hz, 40 A AC Input
• 54V DC output
• Maximum charge current (AC): 60A (30A by default)
• Maximum Charging Current (PV + AC): 100A
• 230 V AC output at 50/60 Hz and 23. 9 amps

Mode for Solar Charging:

• The maximum output of the PV array is 5500W.
• Minimum Solar Voltage: 120 VDC
• The Maximum Solar Voltage (VOC): 500 VDC
• Maximum Charge Current for MPPT: 100A

Safety and Physical Health:

• Protection Against Entry: IP21 (for indoor use)
• Dimensions: 38 cm by 55 cm by 20 cm
• Weight: 9. 65 kg
• Approximate Weight of the System (with battery and trolley): 50 kg
• The system has dimensions of 60 cm by 60 cm by 45 cm.

System Elements:

• 1x Heavy-duty Portable Steel Box with Handles and Lockable Wheels
• 1x Surge Plug (1m, 2. 5mm cabtyre)
• One double-sided female plug receptacle
• 1x Disconnector (Battery to Inverter) + Fuse
• 1x 5. 5kW Hybrid Inverter
• One deep cycle battery that is compatible with the original.

Upkeep and care of batteries

• Keep the system connected to keep the battery charged.
• In order to increase the life of the battery, avoid excessive discharge.
• Combine with solar panels to lessen reliance on the grid and extend backup time.

Conditions of Installation and Warranty

• Inverter has a 5-year warranty against repairs.
• A licensed PV installer must do the installation.
• The installer is required to provide a Certificate of Compliance (COC).
• The system has to be set up in accordance with the applicable safety regulations.