6.2kVA Hybrid Inverter with 120A MPPT and 5.12kWh 51.2V Lithium Battery by ECCO

6.2kVA Hybrid Inverter with 120A MPPT and 5.12kWh 51.2V Lithium Battery by ECCO

The HIN6200S Hybrid Inverter is a high-performance single-phase solar inverter created for optimal battery management and energy conversion. This inverter guarantees the best solar energy harvesting for both residential and commercial uses with a maximum photovoltaic input power of 6,500 W. It offers dependable backup power and grid-tied functionality due to its clean sine wave output, intelligent MPPT charging, and smooth lithium battery integration.

Important Features:

Effective and Powerful Performance

• Maximum Power Output: 6,200 W for continuous load supply.
• Power Surge: 12,400VA to handle high starting loads.
• Dual Output Design: Enables a variety of load priorities.
• Peak Efficiency of 94%: Optimizes performance and energy conservation.

Solar charging and intelligent battery

• Lithium Battery Activation: Facilitates effortless charging using PV or the grid.
• Battery Voltage: 48V DC, with a floating charge of 54V DC.
• Overcharge Protection: Automatically blocks battery harm at 63V DC.
• Flexible Charging Options: 120A max solar charge, 80A AC charge, and hybrid charging up to 120A.

Cutting-Edge MPPT Technology for Optimal Solar Collection

• To maximize solar efficiency, the maximum PV input is 6,500W.
• Voltage Range for MPPT: 60 V to 500 V DC for broad solar compatibility.
• Tolerance to High Voltage: 500V DC open circuit capacity.

Backup Power Management & Smart Grid

• Grid Voltage Range: 90–280 V AC (Appliances) / 170–280 V AC (Computers).
• Automatic Frequency Detection: 50/60Hz sensing for universal compatibility.
• Perfect Transition: 20 milliseconds for appliances, 10 milliseconds for computers.

Constructed with safety and longevity in mind.

• Operating Temperature: Ranges from 10°C to 50°C depending on the environment.
• Humidity Resistance: 5% to 95% non-condensing.
• Overload Protection: With automatic safety shut-off, it can handle loads of up to 140%.

Technical details:

Overall

• Model: HIN6200S
• Singlephase input/output is the phase.
• Parallel Capacity: No
• Battery Communication: Yes, via RS485

AC Input and Output

• Nominal Voltage: 230 VAC
• Acceptable Voltage Range:
• AC between 170 and 280 volts (Computers)
• AC 90–280V (Household Appliances)
• Frequency: 50/60 Hz (AutoSensing)
• Waveform: A perfect sine wave
• Transfer Time: 10 ms for computers and 20 ms for devices

Battery and charging

• 48 V DC is the battery voltage.
• Voltage of the Floating Charge: 54 V DC
• Overcharge Protection: 63V DC
• Charging Method: CC/CV (Constant Current / Constant Voltage)

MPPT & Solar Charger

• MPPT Controller: Yes
• 6,500 W is the maximum output of the PV array.
• Open Circuit Voltage of Max PV: 500V DC
• MPPT Voltage Range: 60–500 V DC
• Maximum Solar Input Current: 27 A
• Maximum Solar Charge Current: 120 amps
• Maximum AC Charging Current: 80 amps
• 120A is the maximum total charge current.

Connection & Physical

• Measurements: 438 x 312 x 122 mm
• 540 × 390 × 210 mm is the package size.
• Weight: 11 kg
• The communication interface is either RS485 (RJ45) or RS232 (DB9).

Environmental Factors

• Operating Temperature: Between 10 and 50 degrees Celsius
• Storage Temperature: between 15°C and 60°C
• Humidity: 5%–95% (non-condensing)

What's Included?

• ECCO Hybrid Inverter 1 × HIN6200S
• Installation Guide & User Manual
• Cables for Battery Communication

Lithium Battery (Ecco 51. 2V 100Ah 5. 12kWh W51100 – Wall-Mounted)

Major characteristics:

• Wall-mounted design that is simple to install and beautiful.
• Lithium Iron Phosphate (LiFePO4) cells – secure, extended lifespan
• Maximum rate of charge/discharge is 1C.
• Simple to use interface
• Works with a variety of inverter manufacturers
• It can handle up to 16 parallel groups.
• adhering to EU TUV regulations as well as North American UL requirements

Benefits:

• Greater Cycle Life: Compared to lead-acid batteries, it has a cycle life that is 20 times longer and a float/calendar life that is five times longer.
• Lighter Weight: Around 40% less weight than comparable lead-acid batteries
• Higher Power: Retains a high energy capacity while having twice the power of lead-acid batteries.
• Greater Temperature Range: 20°C to 60°C
• Enhanced Safety: Prevents the possibility of fire or explosion due to impact, overcharging, or short circuits

What's Inside?

• The Battery
• Mounts and Battery Cables

Specifications for Batteries:

• Battery Type: Set to "USE"
• Voltage for Bulk Charge: 56. 456. 6V
• Float Charge Voltage: 54 V
• Voltage at which the current is cut off: 47 V

Technical Specifications:

• Nominal Voltage: 51. 2V
• Rated Capacity: 100Ah
• Power Total: 5. 12 kWh
• Ideal Operating Voltage Range: 43V to 54. 5V
• Protection Against Short Circuits: Yes
• Reverse Connection Protection for Power On: Optional
• Maximum Charging Voltage: 57. 6V
• Optimal charging voltage: 56. 4 volts (recommended).
• 5500 W is the highest possible continuous output power.
• Max Instantaneous Output Power: 7500 W
• Local Parameter Configuration: Supported
• Maximum installation dimensions (mm): 480 x 170 x 500
• The dimensions of the package in millimeters are 590 by 290 by 615.
• 49 kg
• IP Classification: IP54
• Communication: RS232, RS485, CAN
• Fifteen-year design life

Battery:

• Voltage: 48 volts
• Maximum Discharge Current: 220 A
• Voltage of the floating charge: 54 VDC
• 63 VDC Overcharge Protection
• Technique for Charging: CC/CV

Installation specifications and warranties

• 5-Year Warranty
• Only a licensed Master Electrician or skilled electrical wireman with legitimate registration with the Department of Labor may carry out the installation.
• Following installation, a legitimate Electrical Certificate of Compliance (COC) that is unique to the solar or backup system must be issued.
• The installation must adhere to SANS 10142 and all of its components.
• The following information must be included in warranty claims:
• Images of the installation process
• Legitimate COC
• Evidence that a licensed Master Electrician or skilled wireman completed the installation
• The warranty may be voided if the aforementioned information is not provided.